|
Product Details:
|
| Conductor Material: | Aluminum/Copper | Type Of Conductor: | Stranded |
|---|---|---|---|
| Insulation Material: | Bare | Product Name: | ABC Cable |
| Voltage Rating: | Low Voltage | Application: | Overhead |
| Nsulation Material: | XLPE | Jacket: | PVC |
| High Light: | all aluminium alloy conductor,bare overhead conductors |
||
AAC ACSR AAAC Bare Overhead Conductors XLPE PE Insulated Overhead ABC Wire
PRODUCT DESCRIPTION
1. 0.6/1KV Overhead Cable
2. Aluminum conductor
3. XLPE /PE Insulation
4. Phase conductor+ neutral Conductor
5. IEC ICEA NFC Standard
LV Aerial Bundled Conductor (ABC) Cables
APPLICATION OF TRIPELX ABC CABLE
Aerial Bundle Cable (ABC cable) is a very innovative concept for overhead powerdistribution as compared to the conventional bare conductor overhead cable.
PROPERTY SYSTEM.
|
Electrical Properties |
|
|---|---|
|
|
|
|
rated Voltage0.6/1kV |
|
|
Test Voltage |
4VeffkV |
|
minimum laying Temperature |
-20°C |
|
operating Temperature |
-40°C~ +90°C |
|
maximum Short-circuit Temperature |
250°C |
|
maximum Conductor Temperature |
80°C |
|
minimum Bending radius |
18×OD |
It provides higher level of safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost.
LV Aerial Bundle Cables are designed to supply 600/1000 volt aerial service for temporary service at construction sites, as a service drop (power pole to service entrance),as a secondary cable (pole to pole) or street lighting.
This over-head cable providesreinforced insulation acc. IEC 61140 and fulfill therefore Class II acc. IEC 61140.
It is not flame retardant. But this could be if requested change to a flame retardant cable.
STANDARD OF TRIPELX ABC CABLE
Basic design to BS 7870 / TNB Specification(IEC 60502) / HD 626 S1 / NFC 33-209 / AS/NZS 3560-1 standards
Construction of tripelx abc cable
Conductor: Aluminium conductor, round stranded compressed (RM).
insulation: XPLE compound, UV-resistant.
Core identification: 1, 2 resp. 3 raised longitudinal ribs on the surface of the cores.
The surface of the neutral core should have at least 12 ribs for cross-sections up to 50 mm²
and a minimum of 16 ribs for cores above 50 mm². In the case of five core bundles the
surface of the protective core should be smooth.
CONSTRUCTION PARAMETERS OF TRIPELX ABC CABLE TNB SPECIFICATION (IEC 60502)
|
number of cores xNominal cross Section |
overall diameter |
weight |
Maxinum conductor Resistance |
Minimun breaking Load |
current Rating |
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
No.xmm2 |
mm |
kg/km |
Ω/Km |
KN |
A |
|
1x16+1x25 RM |
15.3 |
160 |
1,910 |
2,5 |
72 |
|
3x16+1x25 RM |
19 |
290 |
1,200 |
4,0 |
107 |
|
3x25+1x25 RM |
23.2 |
400 |
0,868 |
5,5 |
132 |
|
3x35+1x25 RM |
25.6 |
500 |
0,641 |
8,0 |
165 |
|
3x50+1x35 RM |
30 |
680 |
0,443 |
10,7 |
205 |
|
3x70+1x50 RM |
34.9 |
920 |
0,320 |
13,7 |
240 |
|
3x95+1x70 RM |
40.6 |
1270 |
0,253 |
18,6 |
290 |
|
3x120+1x70 RM |
44.1 |
1510 |
0,206 |
23,2 |
334 |
|
3x150+1x95 RM |
49.2 |
1870 |
0,164 |
28,7 |
389 |
|
3x185+1x120 RM |
54.9 |
2340 |
0,125 |
37,2 |
467 |
|
3x25+1x25+1x16 RM |
23.2 |
470 |
1,910 |
2,5 |
72 |
|
3x35+1x25+1x16 RM |
25.6 |
560 |
1,200 |
4,0 |
107 |
|
3x50+1x35+1x16 RM |
30 |
740 |
0,868 |
5,5 |
132 |
|
3x70+1x50+1x16 RM |
34.9 |
980 |
0,641 |
8,0 |
165 |
|
3x95+1x70+1x16 RM |
40.6 |
1330 |
0,443 |
10,7 |
205 |
|
3x120+1x70+1x16 RM |
44.1 |
1580 |
0,320 |
13,7 |
240 |
|
3x150+1x95+1x16 RM |
49.2 |
1940 |
0,206 |
23,2 |
334 |
|
3x185+1x120+1x16 RM |
54.9 |
2410 |
1,910 |
2,5 |
72 |
Contact Person: Kevin
